How to enable Two-Factor authentication in Linkedin?

I'm very glad to hear the Linkedin is the latest company that boosts the security with the Two-Factor authentication. Few days back, Twitter enabled the two-step verification to thwart hackers.

Are you searching for the guide to configure the 2-step authentication? You are at right place.  Here is the guide that will help you to configure the linkedin two-step verification .

Before getting into the actual steps, let me explain what 2-step auth is.

Two-Step Verification:
A security feature that prompts you to enter a temporary secret number sent to your phone whenever you log into your account.

Why you should enable this feature?
I believe this is best security feature.  Let us assume, someone has stolen your login credentials via keylogger or phishing or any other method.  If the hacker try to log into the website with your credentials, he will asked to provide the secret number sent to your mobile.  Fortunately, you have your mobile with you ;) .  So hacker can't log in to your account.  Also you will come to know that someone is trying to access your account. 
 
How to configure the Linkedin Two-factor authentication?

Step1: 
Login to your account and go to the settings page:

https://www.linkedin.com/settings/

Step 2:
select the "Account" tab and click the " Manage security settings " option.

Step 3: 
Now Here , you can see the "Two-step verification for sign in " option and it displays the feature is currently "off".  To turn on the feature , simply click the "Turn on" link.

In next step, you will be asked to enter your phone number.

Step4 :

Once you enter the phone number, you will receive a security code.  After entering the security code sent to your mobile number, the feature will be turned on.  Hurrah, Now you are protected :)

Next time, when you try to log in, you will be asked to provide the secret code :)

IDEA 3G Free GPRS Trick July 2013

Good Morning Friend's,

Today I Am Again Back With latest IDEA 3G Free GPRS Trick.

I Hope You Like Mobiletrick.in New Look, 

If You Really Like Mobiletrick.in New Look Then Don't Forget To Vote.

Don't Forget To Like Mobiletrick Facebook Page For Latest Tricks Updates.

Follow Below Instructions:-

• Proxy:- 515.51.15.55

• Port:- 8080

• Apn:- internet

• Homepage:- www.mobiletrick.in

Note:- Now Save The Settings, And Restart Your Mobile Phone.
Use This Trick @ Low Balance.

Official Update Galaxy Tab 2 10.1 P5100 Android 4.1.2 Jelly Bean

Firmware details:
PDA: P5100XXDMC3
CSC: P5100XEFDMA2

Version: Android 4.1.2
Check this firmwares first :)
Region supported: Austria, Belgium,France,Germany,UK and More.
The users who fail to update the device automatically,follow the following guide to install update manually.

REQUIREMENTS:
1) Install Tab 2 10.1 USB drivers in computer
2) Enable USB debugging mode from setting.
3) Backup all required data.
4) Tab should be unlocked/rooted.
5) Battery should be full.If battery ends during process it will be results in damage your Tab.

PROCEDURE:
1) Download update first from here.And extract the files.
2) Download Odin3 v3.07 from here.And extract it also.
3) Turn off the Tab and go to download mode.
4) Run Odin 3 from the PC
5) Connect the Galaxy Tab 2 to the PC.
6) Now select these files extracted from the update [XXDMC3] folder to install on the tablet

I] Click on the PDA button and select file with .tar extension.
II] Click on the Phone button and select file with name MODEM.
III] Click the CSC button and select file with name CSC.
IV] Click the PIT button and select thefile with extension .pit its done

Ignore if last three file are not found
7) In Odin,verify that Auto Reboot and F.Reset Time checkboxes are selected. Leave Re-Partition option
8) Hit the start button and installation process will be start and it will take some time.
9)If it say installation successfull then reboot the Tab and remove it from PC.
Enjoy new jelly bean 4.1.2update
I AM NOT RESPONSIBLE FOR ANY KIND OF DAMAGE. :) :) :)

Root Samsung Galaxy S3 I9300 Jelly Bean 4.2.2 XXUFME3

 

Hi guys,here i am posting about how to root samsung galaxy s3 I9300 Jelly Bean based on XXUFME3 firmware.

Requirements:
1]USB drivers for Samsung galaxy s3 I9300 to transfer files from device to computer Download
2]Download Root Package for Samsung Galaxy S3(CF-Root-SGS3-v6.4.zip) Download
3]Download Odin v1.85 for samsung galaxy s3 firmware Download

Procedure:

1]Download and extract all the above files to the computer.
2]Make sure that the your phone is based on the XXUFME3 firmware.
3] Take backup of your phone data for safety.
4]Charging of phone should be above 80%.
5]Now switch of the samsung galaxy s3 and enters into the download mode by pressing and holding Volume down button and menu button together and then press power button until triangle is appear.Again press power button to continue.
6]Launch Odin on computer (Run as Administrator)
7]Now connect device to the computer by using USB cable.
8]Wait till Odin shows ID: COM box turn to yellow and showing computer port number.This means connection is successfully established.
9]Then in Odin select PDA button and select the file CF-Root-SGS3-v6.4.zip
10]Confirm that the Auto-Reboot and F.Reset Time Check-boxes are selected .And do not select Re-Partition check box .
11]Now click on the start button in Odin to start installation or rooting.It may take some minutes.
12]After installation complted,phone will be restart automatically and then disconnect the USB from the computer.
13]Now Enjoy,you have have successfully rooted.

Disclaimer: 

Author Is Not Responsible For Any Kind of Damage To Your Phone And Illegal Use By Users.